Harvia modular chimney set for sauna WHP1500, black

The Harvia modular chimney set for sauna WHP1500 is a stylish and easy-to-install chimney solution. Made of steel, this chimney can withstand large temperature fluctuations and is primarily designed for use in separate sauna buildings with heaters, smaller fireplaces, and fireplace stoves.

The steel chimney starter pack includes: a 1.5m steel chimney (WHP1500) and an accessory box containing a 1.0m uninsulated flue pipe, rain cap, rubber rain collar, rain collar installation kit, stainless steel grommet collar ceiling, and steel chimney grommet insulation and safety collar. The steel chimney can be easily extended with 0.5m (WHP500) and 1.0m (WHP1000) long extensions. The additional parts are screwed to each other using an ingenious mechanism, and the smoke pipes also lock together thanks to the grooves in the pipe, preventing movement due to temperature fluctuations. Indoors, the chimney can be installed at a height of 3 meters without support, while the corresponding height outside is 2 meters.

The maximum nominal temperature of the flue gases from the fireplace connected to the Harvia steel chimney should not exceed 600 ºC. The outer diameter of the steel chimney is 220 mm, and the diameter of the fire pipe is 115 mm. The safety distance between the steel chimney and combustible materials should be at least 100 mm. The Harvia steel chimney bears a CE mark, indicating that the product meets international fire and safety requirements. Additionally, the steel chimney is resistant to soot burning.

It is important to carefully read the installation and operating instructions for both the steel chimney and the heater connected to it.